Need advice on modding HSS strat diagram..

Igornopolis

New member
Hello.

I've gotten a lot of help on this forum over the years and I'm grateful. Lots of precious time and money saved! Best place for advice and information. 👍

I've got an hss Warmoth strat with the Suhr type harness that I put together and wired up. Everything is dandy. Couple of Area 61s in neck and middle and Aldrich in the bridge. Awesome combo btw. I've got an autosplit in position 2 but I really want to add a mini switch to choose when to split the Aldrich.

Im confused to what kind of switch I would need and Im not sure how much of an altering of the scematic would there be. I dont want push/pulls. Just a simple switch to split the humbucker. I've provided my exact diagram.

I would appreciate the help. Bryguy and a lot of you guys would probably take 5 second look at it and figure it out. Im not that knowledgable. Hate to assemble everything and have it messed up. Especially with strats and the pickguard!!
 

Attachments

  • S5w_Suhr_1024x1024_7f585913-68c7-4efa-91a4-e81863b60de6.jpg
    S5w_Suhr_1024x1024_7f585913-68c7-4efa-91a4-e81863b60de6.jpg
    46.6 KB · Views: 0
Re: Need advice on modding HSS strat diagram..

Anyone got any advice? Is it as simple as moving the red and white coil split wires to the on/off switch? I assume Id need to ground it as well to the back of the volume pot?
I couldnt even find a on/off mini switch. Its usually on/off/on. Id really appreciate any advice. Thanks!
 
Back
Top