Hello,
Per the header I need a bit of help identifying Seymour Duncan stacked single coil. It's definitely an SD pickup, as on the top of the pickup itself (not the cover) is the Seymour Duncan logo stamped in the white (plastic?) top piece.
The pickup has 2 coils stacked one on top of the other. As I hold the pickup toward me with the slightly trapeziodal part toward the ground, there are 2 pole pieces on the left somewhat elevated, 2 pole pieces in the center fairly elevated, and 2 pole pieces on the right flat and even with the top of the magnet/plastic.
4 wires on the trapeziod, from L-R, Red (top) White (bottom) Green (top) Black (bottom). There is also a drain wire (bare) in the wring bundle that you would connect to the pots or switch.
The only identifying letters/numbers on the pickup are 1NQ on the base.
Any help with this? Wiring diagram? (humbucking only, no coil split)
Thanks in advance.
Per the header I need a bit of help identifying Seymour Duncan stacked single coil. It's definitely an SD pickup, as on the top of the pickup itself (not the cover) is the Seymour Duncan logo stamped in the white (plastic?) top piece.
The pickup has 2 coils stacked one on top of the other. As I hold the pickup toward me with the slightly trapeziodal part toward the ground, there are 2 pole pieces on the left somewhat elevated, 2 pole pieces in the center fairly elevated, and 2 pole pieces on the right flat and even with the top of the magnet/plastic.
4 wires on the trapeziod, from L-R, Red (top) White (bottom) Green (top) Black (bottom). There is also a drain wire (bare) in the wring bundle that you would connect to the pots or switch.
The only identifying letters/numbers on the pickup are 1NQ on the base.
Any help with this? Wiring diagram? (humbucking only, no coil split)
Thanks in advance.
