Need Super Switch wiring gurus / Modify Scott Henderson Mod with Auto Tap

[orangecountycarl]

I will really appreciate some help from any brilliant Superswitch gurus. :wave:


I'm wring my Strat with the Scott Henderson Mod. (This removes the tone control from the 2 and 4 position but leaves them wired for the individual pickup selections.) I have successfully wired this using a Superswitch for three standard single coil pickups.

Now, I'm introducing the SSL-5 single coil pickup for the bridge.

I'd like to wire the same Scott Henderson mod, but modify so that:

1) When the bridge and middle pickup are combined, the bridge SSL-5 is TAPPED.

2) When the bridge is used by itself, the bridge is FULL OUTPUT.


(When you click on the diagram, it will get bigger.)
Scott Henderson Mod Diagram

The diagram link is above. Can anybody please help?
Thank you!

 

[ParameterMan]

Re: Need Super Switch wiring gurus / Modify Scott Henderson Mod with Auto Tap

All you have to do is run the full output wire to lug #1 and the tap wire to lug #2 of pole A. I believe the full is white and the tap is red.

 

[orangecountycarl]

Re: Need Super Switch wiring gurus / Modify Scott Henderson Mod with Auto Tap

Thank you! I will try and report back later!

 

[ParameterMan]

Re: Need Super Switch wiring gurus / Modify Scott Henderson Mod with Auto Tap

According to this diagram, and some quick googling, Duncan singles are: white = hot, black = ground, red = tap. If you're combining them with Fender singles, you should reverse the black and white wires, ie. black to hot and white to ground. So red will go to lug #2 of pole A in your original diagram, black or white will go to lug #1, and the remaining wire to ground.

 

[orangecountycarl]

Re: Need Super Switch wiring gurus / Modify Scott Henderson Mod with Auto Tap

According to this diagram, and some quick googling, Duncan singles are: white = hot, black = ground, red = tap. If you're combining them with Fender singles, you should reverse the black and white wires, ie. black to hot and white to ground. So red will go to lug #2 of pole A in your original diagram, black or white will go to lug #1, and the remaining wire to ground.

Yes, that is the tapped diagram. Thank you so much, PM, for this info.

I will start right now! :yourock:

 

[ParameterMan]

Re: Need Super Switch wiring gurus / Modify Scott Henderson Mod with Auto Tap

Good luck! Let me know how you like it.

 

[orangecountycarl]

Re: Need Super Switch wiring gurus / Modify Scott Henderson Mod with Auto Tap

Good luck! Let me know how you like it.

ParameterMan, it worked great!!

Thanks a ton!! :dance: :bigthumb: :arms: :yourock: :banana:

 

[ParameterMan]

Re: Need Super Switch wiring gurus / Modify Scott Henderson Mod with Auto Tap

Awesome!