Is it possible to wire up a Ibanez s470 with a sh-2 n the neck, a jb jr in the mid, and a sh-13 in the bridge to where the pickup selectors will not coil split but switch to the entire humbucker in all position:example
position 1- neck humbucker
position 2- neck and mid humbucker
position 3- mid humbucker
position 4- mid and bridge humbucker
position 5- bridge humbucker
All this with the stock electronics. Single vol and tone rated at 500k pots and the stock 5 way two pole switch.
:earl:
position 1- neck humbucker
position 2- neck and mid humbucker
position 3- mid humbucker
position 4- mid and bridge humbucker
position 5- bridge humbucker
All this with the stock electronics. Single vol and tone rated at 500k pots and the stock 5 way two pole switch.
:earl: