New Melody Maker Day
- Thread starter AniML
- Start date
ItsaBass
New member
Re: New Melody Maker Day
Classic Esquire trick! It's very cool with the cocked wah wiring for the front switch position.
Most of the time, I am with Funkfingers on having the tone at either 0 or 10. But sometimes I do like to roll it back just a few numbers on some of my guitars.
If you don't feel comfortable with adding the spot for the tone pot with a router, a simple hole saw and drill will do the trick, albeit less elegantly.
Classic Esquire trick! It's very cool with the cocked wah wiring for the front switch position.
Most of the time, I am with Funkfingers on having the tone at either 0 or 10. But sometimes I do like to roll it back just a few numbers on some of my guitars.
If you don't feel comfortable with adding the spot for the tone pot with a router, a simple hole saw and drill will do the trick, albeit less elegantly.
Last edited:
AniML
New member
Re: New Melody Maker Day
Done.
I chiseled away a good amount of material and cleaned up where I could reach with a drum sander on a Dremel. The bottom is a bit rough, but it'll do. Work in progress pics, below. Finished pics coming soon...
Done.
I chiseled away a good amount of material and cleaned up where I could reach with a drum sander on a Dremel. The bottom is a bit rough, but it'll do. Work in progress pics, below. Finished pics coming soon...
AniML
New member
Re: New Melody Maker Day
After adding the tone control, I started over with pickups and tried the PG again. This time it sounds much better - a keeper! , (though I admit I am interested to try a Phat Cat or BG Pure90)
Aside from the mismatched knob, here is the finished product:
After adding the tone control, I started over with pickups and tried the PG again. This time it sounds much better - a keeper! , (though I admit I am interested to try a Phat Cat or BG Pure90)
Aside from the mismatched knob, here is the finished product:
