Noob question about P Rail wiring

[cheeseking3]

First-time guitar modder/builder here! I was wondering if it would be possible to get all the features that SD P Rails offer using a pre-made wiring harness, like the solderless ones from Obsidian Wire? Here's the link for that: https://obsidianwire.com/custom-sc-split-coil-wiring-for-les-paul

 

[Mincer]

Re: Noob question about P Rail wiring

Welcome to the forum!

I've never heard of a harness for those. The Triple Shots make the wiring much, much easier, but there is still some soldering that will have to happen.

 

[ItsaBass]

Re: Noob question about P Rail wiring

The only pre-made "thing" for P-Rails that does that is not a wiring harness. It's the Duncan Triple Shot pickup ring. The Triple Shot installs into a guitar's circuit the same way a pickup does. The pickup is wired to the Triple Shot instead of directly into the guitar's stock wiring. The switches that give you the options are located in the Triple Shot.

You can mimic the switching features of the Triple Shot by using two toggle switches, but I highly doubt that anyone makes a pre-made harness to do that.