PINKBITS
New member
I was originally going to go a Hot Rod 59 style Tele but ran across an Aussie guy that winds Strat and Tele pickups. So I thought rather than send my $ overseas as is usually the case I would try a set. I have not heard his Tele pickups before but his Strat pickups sound amazing.
This is what I've ordered.
Tele '52 Bridge, to the following specifications (Approx 8.10k) NEW
Condition
- Black vulcanized fiber "forbon" bobbins
- AlNiCo 3 poles, Flush heights
- 1971 NOS Phelps-Dodge Coy USA, 42g NYLZ-H
- North polarity, Clockwise winding
- pre build lacquered Bobbins and post build wax potted
- Vintage white cotton Dunnage wrapping (custom colours available)
- Original Zinc Steel base plate, grounded
- Black = ground, White = active, vintage 22g cloth covered pushback
output wires
- includes 6/32 UNC adjusting screws with vintage amber rubber
compression spacers
Tele Neck, to the following specifications (Approx 7.45k) NEW Condition
- Black vulcanized fiber "forbon" bobbins
- AlNiCo 5 poles, Flush heights
- 43g (.055mm) PE coil wire
- North polarity, Clockwise winding (NON RWRP in relation to bridge)
- pre build lacquered Bobbins and post build wax potted
- Chromed, Vintage 3 tang cover, wax potted and then wax cavity filled
and grounded
- Black = ground, White = active vintage 22g cloth covered pushback
output wires
- Body cavity, Vintage "under guard" fitment , self tapping
screws and vintage amber rubber spacers
This is what I've ordered.
Tele '52 Bridge, to the following specifications (Approx 8.10k) NEW
Condition
- Black vulcanized fiber "forbon" bobbins
- AlNiCo 3 poles, Flush heights
- 1971 NOS Phelps-Dodge Coy USA, 42g NYLZ-H
- North polarity, Clockwise winding
- pre build lacquered Bobbins and post build wax potted
- Vintage white cotton Dunnage wrapping (custom colours available)
- Original Zinc Steel base plate, grounded
- Black = ground, White = active, vintage 22g cloth covered pushback
output wires
- includes 6/32 UNC adjusting screws with vintage amber rubber
compression spacers
Tele Neck, to the following specifications (Approx 7.45k) NEW Condition
- Black vulcanized fiber "forbon" bobbins
- AlNiCo 5 poles, Flush heights
- 43g (.055mm) PE coil wire
- North polarity, Clockwise winding (NON RWRP in relation to bridge)
- pre build lacquered Bobbins and post build wax potted
- Chromed, Vintage 3 tang cover, wax potted and then wax cavity filled
and grounded
- Black = ground, White = active vintage 22g cloth covered pushback
output wires
- Body cavity, Vintage "under guard" fitment , self tapping
screws and vintage amber rubber spacers
Last edited: