P-rails neck in the bridge

[Blille]

I have a p-rails in the bridge but it's too hot in series. I pushed it as low as it goes etc.

I use the p-90 and parallel but I was wondering if anybody had tried to put the neck model in the bridge.


Sent from my iPhone using Tapatalk

 

[frankfalbo]

Re: P-rails neck in the bridge

Neck model in the bridge is good. Vintage output in all the settings. If you want to experiment with the pickup you have try flipping it 180° so the rail is near the bridge. That will brighten up the series mode a little.

 

[Blille]

Re: P-rails neck in the bridge

Neck model in the bridge is good. Vintage output in all the settings. If you want to experiment with the pickup you have try flipping it 180° so the rail is near the bridge. That will brighten up the series mode a little.

Thanks!

Good idea, I'll give that a try first. I really like the quack I get from the rails + inside could of neck and use it quite a bit so that might be the trade-off.




Sent from my iPhone using Tapatalk

 

[Blille]

P-rails neck in the bridge

After some poking I decided to order a Hybrid. I know I really like it and I'll just try to do the p90 thing on another guitar


Sent from my iPhone using Tapatalk