P-Rails set with minitoggles

McDube

McDube

New member
Dear fellow forumers,

Currently I have my project set up for this scheme:
http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=2h_1v_1t_3w_2pp

And if I were to put a Black Winter set in it, it would be exact what I want, as it equals the scheme on my Ibanez JTK2 (albeit I use two ON/ON DPDT mini-toggles, one per pickup, instead of push-pull pots)

But I'm thinking about getting two P-Rails, and want to be able to use them both separately as P-90, single coil, or humbucker.
Does that make me require a ON/OFF/ON DPDT, or an ON/ON/ON DPDT mini-toggle per pickup ?
And what wiring scheme do I need to solder then ?

Thank you all :)
 
Re: P-Rails set with minitoggles

Triple Shots are not in my interest, as I want the body of my project to be as much alike my JTK2 as possible.
Now, I know the JTK2 uses different switches than minitoggles, but on my project I have the toggles in the same spot as on the JTK2.
And as I'm used to my JTK2, I don't want a different system, even though the Triple Shots may very well suit my sonic needs. They just don't suit my aesthetic needs :)
 
You must log in or register to reply here.
Back
Top