I'm looking to wire neck/bridge pickup in parallel / out-of-phase when both are selected via 3 way toggle switch; since this will be a permanent configuration, I don't see the need for extra switches. None of the schematics in the SD site have this setup. Has anyone done this; and if so, can you share your setup? Thanks.
parallel / out-of-phase wiring for 3 way toggle
- Thread starter NT_FLY
- Start date
Artie
Peaveyologist
Re: parallel / out-of-phase wiring for 3 way toggle
Its simple. Just use a normal 2-humbucker, 3-way diagram, but reverse the black and green wire of the bridge pup. When both are selected, they'll be in parallel, out-of-phase.
http://www.seymourduncan.com/website/support/schematics/2hb_1vol_1tone_3way.html
Its simple. Just use a normal 2-humbucker, 3-way diagram, but reverse the black and green wire of the bridge pup. When both are selected, they'll be in parallel, out-of-phase.
http://www.seymourduncan.com/website/support/schematics/2hb_1vol_1tone_3way.html
