Asomodai
New member
Ok guys, ive just recently installed a Black diamond washburn ((which is actually badged seymour duncan)) paul stanley signature pickup into my H-s-s superstrat. I was wondering if the pickup was a custom made pickup for paul stanley himself, or if it was simply a rebadged normal seymour duncan?
Does anyone have any specs of the pickup itself?
I soldered the black wire to the bridge position on the 5 way , the bare wire onto the volume pot, and the green wire also onto the volume pot. The other two wires, red and ((white i think?)) i soldered together. Now i am getting alot of feedback, and i allways did with old pickup to, so i need to sheild the electronics, How would this best be done?
How would i go about doing it with common household kitchen foil for example?
Does anyone have any specs of the pickup itself?
I soldered the black wire to the bridge position on the 5 way , the bare wire onto the volume pot, and the green wire also onto the volume pot. The other two wires, red and ((white i think?)) i soldered together. Now i am getting alot of feedback, and i allways did with old pickup to, so i need to sheild the electronics, How would this best be done?
How would i go about doing it with common household kitchen foil for example?