Peavey 6505+ combo problems help.

[epi]

When using pedals makes a lot of feedback noise, like more then it should be. I have tried using these to signal chains and both sound really bad.

I have tried going straight into the amp and it sounds fine... so it is something with the pedals....

Guitar > Wah > Suppressor > Ibanez TS9 > Suppressor (the NS-2 using the send return with the TS9) > into amp then in the FX loop I had a Send > Looper > Chorus > Return

Guitar > NS-2 > Looper > wah > TS-9 > Chorus > input of amp (not using the NS-2 send and return) (and not using the FX Loop)

Both of these have given me feedback beyond all recognition....

my amp settings

Rhythm: High: 7 Mid: 6 Low: 4

Lead: 7 Mid: 6 Low: 6

if you need anymore info just comment/post and I will try and answer but please help, this amp was purchased around January - February so it is fairly new....

Please help.

 

[epi]

Re: Peavey 6505+ combo problems help.

and I tried turning down the gain and it doesn't go away....

 

[Johtosotku]

Re: Peavey 6505+ combo problems help.

Have you tried adding one pedal at a time to find if there's something specific causing the noise?

 

[epi]

Re: Peavey 6505+ combo problems help.

Have you tried adding one pedal at a time to find if there's something specific causing the noise?

no... lol I will try when I get home, but people feel free to keep giving more suggestions if you think it is something else, Thanks Joh

 

[dominus]

Re: Peavey 6505+ combo problems help.

Too much gain on the TS9?

 

[Boogie Bill]

Re: Peavey 6505+ combo problems help.

It could be a tube, either preamp V1 or even a power tube that is microphonic.

Bill

 

[DeadandBuried]

Re: Peavey 6505+ combo problems help.

What are you using to power your pedals? And are the cables ok? Don't use cheap ass ones as they buzz and cause noise.

 

[epi]

Re: Peavey 6505+ combo problems help.

What are you using to power your pedals? And are the cables ok? Don't use cheap ass ones as they buzz and cause noise.

using fender cables and using the Power All system... brought it to the store and they helped me out and now it is working... I guess the amp was picky on what way the pedals went in... we tried 4 different set up options...