Phantom Powering Active Electronics

[sublimerules9604]

I was wondering if it is possible to phantom power active electronics using a sterio cable? I made up a diagram to explain:

I am pretty sure it will work, but will it cause interference or unwanted noise?

 

[DankStar]

Re: Phantom Powering Active Electronics

are you talking about a device like this?

http://www.guitarelectronics.com/c=yVGkY2oDcGnxFcuEjM3mB78rC/product/PMTXBAT9

if not, these guys are the einsteins of guitar electronics, and could help ya out.

 

[sublimerules9604]

Re: Phantom Powering Active Electronics

Yes Exactly like that, but not 70 dollars... and probably powered by a power jack not a battery.

 

[Artie]

Re: Phantom Powering Active Electronics

Took me a second, but your diagram is fine. The 9-volts can be injected in several different places. It looks like you have it worked out great.

 

[Jeroen]

Re: Phantom Powering Active Electronics

EBS actually integrates this in their amps' input and FX-return, so you could phantom power your active bass or the last pedal in the FX-chain that has the ability to be powered through its output (EBS exclusively, IIRC). Great feature, I used it on my old EBS Gorm to power my Yamaha TRB5II.