So my PC saga continues. I popped off the back and opened her up to prep this baby for a 4-way switch. I lifted the white wire that was soldered to the back plate, and added and extension to this so I can it wire to the switch. Then I added a permeant ground wire from the back plate to my volume pot.
I thought this is what you are supposed to do. I did think it was weird that the hot wire was black because that's usually ground, but what do I know.
I wired it up to the switch and got signal in all positions but number 3. Here's the kicker, I'm not even sure the PC is in the mix. I changed magnets in it to chime it up so I really don't know what this pickup sounds like.
This all has me scratching my head. I'm guessing I did something wrong on the pickup wiring because I've checked the switch part a millions times.
Can anyone help!
I thought this is what you are supposed to do. I did think it was weird that the hot wire was black because that's usually ground, but what do I know.
I wired it up to the switch and got signal in all positions but number 3. Here's the kicker, I'm not even sure the PC is in the mix. I changed magnets in it to chime it up so I really don't know what this pickup sounds like.
This all has me scratching my head. I'm guessing I did something wrong on the pickup wiring because I've checked the switch part a millions times.
Can anyone help!