I have been using Duncan’s in my guitars for years. Recently I started playing again after a long hiatus and I am considering getting a few new guitars. Naturally I want to put some Duncan’s in them. These are the guitars I am considering, PRS Singlecut SE and a Fender Powerhouse Stratocaster.
I am curious what pickups people have tried in these guitars and what you have found to be a good set of PU’s to use in them. I was considering the following setup on the PRS SE, matched set of 59’s with a push/pull tone pot to allow single type sounds when in the pulled position. On the Strat I am considering the Calibrated California 50's set but I might be open to something a little hotter.
Any and all feedback is greatly appreciated!
I am curious what pickups people have tried in these guitars and what you have found to be a good set of PU’s to use in them. I was considering the following setup on the PRS SE, matched set of 59’s with a push/pull tone pot to allow single type sounds when in the pulled position. On the Strat I am considering the Calibrated California 50's set but I might be open to something a little hotter.
Any and all feedback is greatly appreciated!