pickup switches?

nepalnt21

HamerTimeologist
if i were to build a HH style guitar, would the following be possible: have it wired so that there are 4 on-on switches, each one wired to a particular coil, and each would activate/ deactivate each coil?
 
Re: pickup switches?

also, when all of the coils are on, the guitar would act just as a standard HH guitar (like a les paul)
 
Re: pickup switches?

shure that's possible to wire. I could even imagine a switch for out-of-phase (on-off-on) for each coil. You could combine them in parallel or serial - but you have to decide that when soldering it together...
 
Re: pickup switches?

would this set-up hinder the sound? or would it be just like if i wired it in the traditional way?
 
Re: pickup switches?

I Would Suggest A 5 Way Switch And Use A Push Pull Pot For Selecting In And Out Of Phase....

My Ignorant .02 Cents
Chris
 
Re: pickup switches?

What you're describing is actually a bit more complex than meets the eye. In its simplest form, you'ld have both coils in parallel when both switches were on, rather than the "normal" series mode.

What might be better, (which is what I had at one time), is to use three DPDT switches. One thats on-on-on to select between either/or pickup.
And the other two on-off-on, to select between either coil/series mode for each pup.

Its much simpler than it sounds. :)
 
Back
Top