Possible to have Series/Parallel switch AND coil split switch ?!

[evh_slash]

Hey guys,

I currently have Gibson SG with the 'petrucci' style H-H setup with the 3 way switch which splits both to both inner coils in the middle position.

I'm wondering if its possible to wire a Series/Parallel push pull pot for the neck pickup BEFORE the 3 way switch and STILL have the coil splitting feature in the middle position ?

I essentially am looking to have the option of a Series/Parallel switch for the Neck pu, but without messing up the coil split when in the middle position... Or without messing up the function of the 3 way switch in general really !!

 

[Demanic]

Re: Possible to have Series/Parallel switch AND coil split switch ?!

Have you ever heard of the Triple Shots? They'll do that without the push/pulls.

Sent from my MotoE2(4G-LTE) using Tapatalk

 

[evh_slash]

Re: Possible to have Series/Parallel switch AND coil split switch ?!

Can I use those with my SG ? Aren't they pickup mounting rings with all the coil splitting flavours ?

 

[Demanic]

Re: Possible to have Series/Parallel switch AND coil split switch ?!

Can I use those with my SG ? Aren't they pickup mounting rings with all the coil splitting flavours ?

I would think that you could. And yes, they have all the wiring combinations. Which means that you could use one of the possible additional push/pulls as a phase switch between the two pickups. The other could be used as a series/parallel between the two pickups.
It would give a ridiculous amount of wiring combinations. Basically, full blown Jimmy Page wiring with more streamlined switching.

Sent from my MotoE2(4G-LTE) using Tapatalk

 

[Artie]

Re: Possible to have Series/Parallel switch AND coil split switch ?!

What kind of pickups are in there now? The right-side of that diagram uses something other than Duncans.