problem with coil splitter/tone and the new PU

[duckthesystem]

hey guys,

i got a duncan distortion for my ltd ec200 qm on the bridge and
this is the wiring diagram:
http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=2h_2v_1t_3w_pp

the PU is in the guitar, but it sounds very stange, worse than the original PU(EMG esp lh 300)
and it also sound so quiet and the tone is away (can split it or change tone, nothing happens)
i soldered the connections several times.
Did i something wrong?
BTW: the esp Pickups have the same wire color, but other meanings

 

[GuitarDoc]

Re: problem with coil splitter/tone and the new PU

Check the responses to your other post.