Problem with Lil 59 with hot Tele neck.

B

BossRoss

New member
So I have a lil 59 in my bridge and a hot Tele single coil in the neck. I just put them in and was pumped to try it out. When I hooked up I am not getting any sound from the neck. Would this be because it’s out of phase or did something just come loose? Any suggestions?


Sent from my iPhone using Tapatalk
 
Re: Problem with Lil 59 with hot Tele neck.

A single coil can't be out of phase on its own. Yes, the first thing to check is always bad connections. Also something could be grounding out the neck lead somewhere in the cavity.
 
Re: Problem with Lil 59 with hot Tele neck.

Clint 55 said:
A single coil can't be out of phase on its own. Yes, the first thing to check is always bad connections. Also something could be grounding out the neck lead somewhere in the cavity.
Click to expand...

Ok thanks will check into that


Sent from my iPhone using Tapatalk
 
Re: Problem with Lil 59 with hot Tele neck.

If you run into problems, post several clear pics and we will try to sort it out!
 
Re: Problem with Lil 59 with hot Tele neck.

90b728d6ac20698ec94de33ec3f752c6.jpg



Sent from my iPhone using Tapatalk
 
Re: Problem with Lil 59 with hot Tele neck.

Here is my pots. I got the front neck working now I hardly have any volume coming from the bridge? What’s going on with it?
04362680a93fa11cff48805ee5335b93.jpg



Sent from my iPhone using Tapatalk
 
Re: Problem with Lil 59 with hot Tele neck.

Says not to connect them in the diagram. It’s a 3 way switch.


Sent from my iPhone using Tapatalk
 
Re: Problem with Lil 59 with hot Tele neck.

Clint 55 said:
The red and white wires aren't connected.
Click to expand...

Turns out after looking again I am supposed to solder them two together. Thanks for looking I just couldn’t see it. Was getting pissy lol


Sent from my iPhone using Tapatalk
 
Re: Problem with Lil 59 with hot Tele neck.

Is it working now (I've done this too, btw)?
 
You must log in or register to reply here.
Back
Top