PRS Dragon I pickup wiring issues

[TastyMeat333]

Hello everyone! I am working on a PRS style build and got a used set of Dragon I pickups. I am working on wiring them but can't seem to get it right. It is a 1 vol 1 tone configuration with a 3 way selector switch and push pull coil splitting. Does anyone have any experience with dragon I pickups or have a diagram I can reference? Attached below is a diagram that I was using that didn't work. Thank you!

 

[Jack_TriPpEr]

Since the pups are used, my recommendation would be to back up a step and use a multimeter to vet that there are no issues with the pups.

This Youtube tutorial covers how to do that.

 

[JB_From_Hell]

The leads are funny on some older stock PRS pickups, due to the various switching schemes they used.

 

[alex1fly]

Have you been here? https://prsguitars.com/support/schematics

Bunch of schematics straight from the PRS horse mouth.

You might also check the PRS Guitar forum. They may know the specifics of what you're dealing with. Don't tell them it's a PRS style build, though... tell them its a PRS you're trying new pickups in. You kind of have to worship at the altar if you want help there.