pup switching idea... schematics?

[rraawwrr]

this would be pretty cool for me if it worked - it would give me all the tones id need. so i would have a guitar with 2 humbuckers, going into a 3-way switch.

position one - neck pup
middle position - both in parallel
position three - bridge pup

and then just a volume knob, no tone knobs.

how would this work? has anybody ever seen a schematic for something like this? thanks!


rraawwrr

 

[korinastratkyle]

Here's a diagram for a Gibson-type switch

http://www.seymourduncan.com/website/support/schematics/2hb_1vol_3way.html

You can do this with a 3-way Fender switch, just take the tone control out of the circuit (don't hook up a tone control and by not having that black wire go out from the lug on the volume control).
http://www.seymourduncan.com/website/support/schematics/std_tele.html

 

[Artie]

Here's a copy of the answer I posted in your question in the Guitar Forum:

That is the way that almost all two-humbucker guitars are wired.
The only exception being, that you're leaving off the tone control.

Edit: Removed the link since the one korinastratkyle posted was better.