Quick fire wiring question

[Left_Hand_Strat]

I have two humbuckers for my tele, a three way switch and two Push Pull pots.

I have found a diagram for this on the SD website, However, I need the Back push pull pot to control the bridge pickup and the Front Push Pull pot to control the neck pickup.

My understanding of the diagram is that the SD wiring doesn't cater for this.

So how would I wire it as I would like to?

 

[Artie]

Re: Quick fire wiring question

The switches are independent of the pots. Just switch the wires on the two switches themselves. Not the pots. In other words, move the black/green neck wires to the vol push-pull and move the red/white wires to the tone push-pull.