Re: Wiring help

Astro61201

New member
Re: Wiring help

Hi, I was hoping somebody on here would be able to produce a wiring diagram for my partscaster, or at least help me work out how to make one that will work.

For my partscaster I want a HSH configuration, with fenders twin head humbuckers in the bridge and neck position and an N3 noiseless pickup in the middle position.
I want to have an S1 switch (this is what confuses me the most) to supply me with five extra pickup selections.
Such as:
1: Neck and Middle in series
2: Neck and Middle in series with capacitor on neck pickup
3: All Pickups in Series
4: Middle and Bridge in series with capacitor on Bridge Pickup
5: Bridge and neck pickups in series with capacitors on both pickups

However I also want to have both tone pots act to split the humbuckers (leaving the outer coils active), an out of phase switch (using a dpdt button) and a neck pickup on switch (like David Gilmour's strat).

If anybody could provide me with a wiring diagram for this or at least some guidance it would be much appreciated. Thanks in advance. :)
 
Last edited:
Re: Wiring help

Re: Wiring help

Welcome to the forum.

Position 5 with the S-1 switch engaged is redundant. It yields the same pickup combinations as bridge + middle + the neck PU switch engaged.
 
Back
Top