Recommend a Telecaster bridge for good cleans and high gain

A Hot Rails for Tele might work with a series/parallel switch. I think a Cool Rails (if they had made one) would be too bright. I think if there was a Tele Little 78, that might be perfect.
 
The clips with the Kiesel Retro Solo guitars running the Duncan Antiquity Tele set are jaw dropping both clean and at high gain. Guitar itself has a lot to with it as they will nuke anything the Fender Custom Shop has but--.
Here is one as an example.
 
Another clip Kiesel artist with a RS running the Duncan Antiquities. The clips kill! BTW a Retro Solo with this set up will likely be my next guitar purchase as need a good traditional Tele tone badly and I like these guitars better than the Suhr or Fender Custom Shop guitars I have played..
 
I think if there was a Tele Little 78, that might be perfect.

With all the modern parts and adapters available these days, you'd think there would be a Tele bridge cut for a Strat single. But I don't think I've ever seen one.
 
mounting, angle, and shape are different. im about to install a tele bridge pup on a squier strat and i have to rout the body and pickguard to make it fit
 
With all the modern parts and adapters available these days, you'd think there would be a Tele bridge cut for a Strat single. But I don't think I've ever seen one.

I haven't seen one either. It would be a good idea, though!
 
Alnico II Pro and a pedal is what I do. I've found it's easier to start with a good clean tone and add dirt/gain via pedal or amp than it is to try and clean up a hot pickup.
 
Alnico II Pro and a pedal is what I do. I've found it's easier to start with a good clean tone and add dirt/gain via pedal or amp than it is to try and clean up a hot pickup.

This is my approach, too.
 
  • Like
Reactions: McD
You cannot route a Tele bridge for a strat single. The Tele bridge plate will not cover the „mounting ears“ -> visible holes in the guitar top!

I’ve seen a guy cut the ears off of a JB jr and glue it to a Tele base shaped fiber board though.
but if you don‘t like the result you‘re screwed
 
Last edited:
Back
Top