Rig Signal Path Thread!

[jcthejester13]

Post your rig's signal path here. These always intrigue me how people have things all set up.

Here's mine:

Guitar > Digitech Whammy IV > EHX POG > EHX Big Muff G4 > EHX Big Muff NYC > Boss PH-3 (w/ tap tempo) > Ernie Ball VP Jr. > MXR Phase 90 > MXR Carbon Copy > EHX Memory Man Hazarai > EHX Holy Grail > Boss RC-20XL >

Big Shot ABY >​

Fender '65 Twin Reverb RI and​

Fender '59 Bassman RI and​

GFS GT-90 Tuner​

 

[Jeffrec]

Re: Rig Signal Path Thread!

Mine's pretty boring. It's:

1. Guitar -> Amp

2. Guitar-> Tonelab set to '68 Plexi -> into the amp's effects loop

or

3. Guitar -> Tonelab/'68 Plexi and an overdrive pedal setting for lead, on the Tonelab -> then into the amp's effects loop.

 

[skyydogg01]

Re: Rig Signal Path Thread!

guitar
Line6 POD HD 300
homemade master volume box
Fender Frontman 65R

 

[King IzzO)))]

Re: Rig Signal Path Thread!

Guitar > Hardwire tuner > 80's TS9 > 80's Turbo Rat or OD-3 > 80's Ibanez Bi-Mode Chorus > TR-2 > DD-2 > 80's Peavey Butcher

or

Guitar > Hardwire Tuner > MXR OD (ZW setting) > Bi-Mode > TR-2 > DD-2 > Boogie MarkIII

 

[NevermindUs]

Re: Rig Signal Path Thread!

Guitar -> Dunlop 535Q->Boss CH1->Boss DD3->Boss NS2->Laney GH50L->Mesa 412
Guitar->Dunlop 535Q->Digitech WH4->EHX Big Muff Pi-> Egnater Renegade 65->JetCity 112

im looking to add a tuner for both rigs, and a boost and reverb for the laney board

 

[phil_104]

Re: Rig Signal Path Thread!

I have 2 electric setups. One for shows where I need to reproduce the exact tones from the album, the other for shows where I play songs like they are meant to be played : the way I feel like it on the spot when the band gets going.

Repro path :

Gibson ES339 - Dunlop 535Q wah- Fulltone Plimsoul - Boss DS-1 - MXR Carbon Copy- EHX LPB1 - Boss TU3 - Fender Blues JR with a few mods
(The signal goes into an AB box before going into the wah, it can be switched to a path that goes straight into the amp, if I want to bypass all my pedals)

The fun path :

Gibson ES339 - EHX Russian Big Muff or Fulltone Plimsoul - Boss TU3 - Fender Blues JR

 

[ErikH]

Re: Rig Signal Path Thread!

This is my live setup.

Wireless >> Delay >> Tuner >> Amp

 

[twebb0716]

Re: Rig Signal Path Thread!

American HSS Strat > pitchblack tuner > dunlop volume > OCD > DS-1 > blackstar HT-20

in the effects loop I have

ph-3 phaser > corona chorus > dl-8 delay > rv-3 reverb

 

[Simon_F]

Re: Rig Signal Path Thread!

Lately for gigging it's been...

Guitar (LP / Tele) >> Vox V848 >> Boss OC-2 >> Bad Monkey >> Boss DD-3 >> Marshall (JMP 2104 or DSL 50)

 

[ratherdashing]

Re: Rig Signal Path Thread!

My main rig as of today:

1. Guitar
2. home-made JFET buffer
3. Ernie Ball VP Jr
4. modded Crybaby
5. Boss CS-2 (MIJ)
6. Raptor
7. Catalinbread Manx Loagthan
8. Empress Phaser
9. Maxon PT999 Phase Tone
10. MXR Micro Flanger
11. Boss CE-2 (MIJ)
12. TC Electronic Nova Repeater
13. Korg Pitchblack
14. Mesa Mark V head
15. Mesa Stiletto 4x12 cab

 

[NoNolva]

nothing else

nothing else

this is bump!

 

[some_dude]

Re: Rig Signal Path Thread!

Guitar -> Amp -> Cab

or

Guitar -> Wah -> Amp -> Cab
(loop) Delay (/loop)

 

[misterwhizzy]

Re: Rig Signal Path Thread!

^ Boy, that's a tough act to follow. I'll bite the bullet for whoever's next.

View attachment 30792

Same wireless as Erik_H. I don't remember the model.

Wireless -> Dunlop Hendrix Wah -> Boss TU-2 -> Monte Allums SD-1 GT -> MXR Zakk Wylde Overdrive -> Carbon Copy -> Visual Sound H2O -> TC Electronics Hall of Fame -> JCA20H or Blackstar HT-5 -> Lopoline 2x12 with Governor and Wizard

 

[everdrone]

Re: Rig Signal Path Thread!

Guitar -> Amp -> Cab

or

Guitar -> Wah -> Amp -> Cab
(loop) Delay (/loop)

says the man with a zillion expensive pedals in his "discrete" photo below. GREAT taste by the way, what a collection!

I dig all these setups of people above, especially ones that end with marshall or marshall equivalents

Mine is guitar--> gstring noisegate (filter out squeels from high gain) --> tuner poly (to get best tuning and silence pedals) --> wah Jerry Cantrell (like Hendrix sets up) --> black arts pharaoh (fuzz needs to be first cause they are dynamic) --> ratII (distortion set to light OD or full blown to dime my marshall --> back to gstring (filters pups and pedal chain) --> back to amp(s) of my Marshall JCM 900 or Orange Thunderverb 50 and adjust reverb to desired levels --> then to highly coveted orange closed back 2x12 cab

 

[guitfiddle]

Re: Rig Signal Path Thread!

Guitar, tuner, booster, amp.

 

[dreadguard268]

Re: Rig Signal Path Thread!

Guitar, mxr noise clamp (ts9 in the gates loop), boss tuner, Mesa single rectifier.

I've got an mxr carbon copy and a babe sonic stomp in the amp's loop.

 

[some_dude]

Re: Rig Signal Path Thread!

says the man with a zillion expensive pedals in his "discrete" photo below. GREAT taste by the way, what a collection!

I keep them as reminders.

As an example, I've probably bought and sold somewhere around eight Big Muffs of various types and vintages. Now I keep one, and every time I think it's a good idea to get one again I plug in the one I still have and remind myself why I sold the last seven of them.

Same deal with the flanger. Plug it in, noodle for a bit, play Barracuda, noodle a bit more. Remember why I don't use a flanger and put it back on the shelf.

It's saved me a fortune.

 

[aleclee]

Re: Rig Signal Path Thread!

Guitar -> AxeFx -> QSC K8 (x2 for stereo)

Simple, flexible, and loud as hell. Oh, it sounds great, too!

 

[Toe-Knee]

Re: Rig Signal Path Thread!

I have two setups

my main one is

Guitar > Amp

then if i'm feeling adventurous

Guitar > Dual channel looper (clean/Od) that also switches the amp channel respective of the loops > Amp

 

[Hoss]

Re: Rig Signal Path Thread!

mine is REALLY complicated...