Series or Parallel switch?
- Thread starter BossRoss
- Start date
Aceman
I am your doctor of love!
Re: Series or Parallel switch?
Depending on the pickups involved....
Using the 5-way for that means you lose some combinations.
Using a push/pull means you get more combinations PLUS series / parallel
Say the 5 way is 5 sounds
HB series
HB inner + Middle para
Middle Single
Middle Single + bridge HB para
Bridge HB
or
HB series
HB inner + Middle series
Middle Single
HB para
Bridge HB series
add a push / pull for series-Para and you get:
HB - ser or para
HB inner + Middle Series ser or para
Middle Single
Middle Single + bridge HB Inner ser or para
Bridge HB - ser or para
9 sounds....No need to choose. Have it all.
Depending on the pickups involved....
Using the 5-way for that means you lose some combinations.
Using a push/pull means you get more combinations PLUS series / parallel
Say the 5 way is 5 sounds
HB series
HB inner + Middle para
Middle Single
Middle Single + bridge HB para
Bridge HB
or
HB series
HB inner + Middle series
Middle Single
HB para
Bridge HB series
add a push / pull for series-Para and you get:
HB - ser or para
HB inner + Middle Series ser or para
Middle Single
Middle Single + bridge HB Inner ser or para
Bridge HB - ser or para
9 sounds....No need to choose. Have it all.
Last edited:
Re: Series or Parallel switch?
Adding a push-pull to a regular 5 way might be useful, but you might get stuck with 2 moves to get to a sound you like. I might do that first for a few months, then decide what I actually use, and see if that could be hardwired into a switch.
Adding a push-pull to a regular 5 way might be useful, but you might get stuck with 2 moves to get to a sound you like. I might do that first for a few months, then decide what I actually use, and see if that could be hardwired into a switch.
PFDarkside
of the Forum
Re: Series or Parallel switch?
The mental thought experiment of all the wiring permutations can be exciting... then you wire it all up and some sound similar, some you’d never use, etc. I like Mincer’s idea, find all the sounds you like, then develop a superswitch diagram to get your favorites.
The mental thought experiment of all the wiring permutations can be exciting... then you wire it all up and some sound similar, some you’d never use, etc. I like Mincer’s idea, find all the sounds you like, then develop a superswitch diagram to get your favorites.
cactus jack
New member
Re: Series or Parallel switch?
I just built an HSH style guitar with a 5 way autosplit switch and two push pulls for series/parallel. When I do it again, I'll skip the push pulls. I suppose it's nice to have, but it didn't add significant color to my tone. In fact, the autosplit positions sound better, and I could have saved a lot of time and hassle just wiring the switch.
Quick comment on the Superswitch. If you're installing in a pickguard than Fender's switch is fine. However, if you're putting it in a Tele, or tight control cavity get the Oak Grigsby switch. Its the exact same but about a 3rd skinnier and easier to install.
I just built an HSH style guitar with a 5 way autosplit switch and two push pulls for series/parallel. When I do it again, I'll skip the push pulls. I suppose it's nice to have, but it didn't add significant color to my tone. In fact, the autosplit positions sound better, and I could have saved a lot of time and hassle just wiring the switch.
Quick comment on the Superswitch. If you're installing in a pickguard than Fender's switch is fine. However, if you're putting it in a Tele, or tight control cavity get the Oak Grigsby switch. Its the exact same but about a 3rd skinnier and easier to install.