Telecustom
New member
I have a 3 PU Tele w/Antiquities that I'd like to put a Double Pole ON/OFF/ON Bat Handle Mini Switch to activate the Bridge PU in any position on the 5-Way Switch.
Here's the tricky part. I want to do a Bridge-On Parallel/Off/Series switch. I know that in order to have Series/Parallel, two PUs have to be on. So I know that the Bridge position will not be Series or Parallel. Any assistance in greatly welcome.
* Pickups:
(Neck) Seymour Duncan Antiquity II
(Middle) Seymour Duncan Antiquity II (Strat Middle)
(Bridge) Seymour Duncan Antiquity II
* Pickup Switching: 5-Position Blade
Position 1 - Bridge
Position 2 - Bridge and Middle
Position 3 - Middle
Position 4 - Neck and Middle
Position 5 - Neck
* Controls:
Master Volume (w/Treble Bleed)
Master Tone
Switch - Bridge Parallel/Off/Series - DPDT Switch
Here's the tricky part. I want to do a Bridge-On Parallel/Off/Series switch. I know that in order to have Series/Parallel, two PUs have to be on. So I know that the Bridge position will not be Series or Parallel. Any assistance in greatly welcome.
* Pickups:
(Neck) Seymour Duncan Antiquity II
(Middle) Seymour Duncan Antiquity II (Strat Middle)
(Bridge) Seymour Duncan Antiquity II
* Pickup Switching: 5-Position Blade
Position 1 - Bridge
Position 2 - Bridge and Middle
Position 3 - Middle
Position 4 - Neck and Middle
Position 5 - Neck
* Controls:
Master Volume (w/Treble Bleed)
Master Tone
Switch - Bridge Parallel/Off/Series - DPDT Switch