Seth Anniversay Problem

[gratefulmike]

Hi, can anyone give advice on a possible solution to this problem? I'm getting a good impedence measurement, and when I tap on the screws with a scredriver I can hear it loud and clear, but it's not picking up the strings, or very lightly picking up the strings. I've tried switching out the magnet with a 57 classic, and I've tried reversing the magnet. All my solder points were good, and I've tried it in different guitars with the same result.
Thanks, Mike

 

[gratefulmike]

Re: Seth Anniversay Problem

Nothing?

 

[tone4days]

Re: Seth Anniversay Problem

welcome

hmmm ...

bad pot? ... bad jack? ... bad amp channel? ... bad cable plugging into amp?

t4d

 

[gratefulmike]

Re: Seth Anniversay Problem

Thanks for the response. Its definitely the pickup, I tried it in 2 different guitars with the same result. Also, I put the old pickup back in, and it works. Same cable, pots, etc. This set was a return at mf, however, they assured me it worked fine. They probably just put a meter on it and it looked fine. I'm stumped. BTW, the neck pickup sounds great.
Thanks, Mike