Seymour Duncan P90-sized humbuckers
- Thread starter lppier
- Start date
chill
New member
Re: Seymour Duncan P90-sized humbuckers
I've heard that mini-humbuckers (SM-1, SM-2, SM-3) will fit in P90 sized holes with the mini-humbucker mounting rings for LP deluxe's. Haven't measured it though.
And of course, DiMarzio makes a few P90 sized humbuckers in addition to their minis.
I've heard that mini-humbuckers (SM-1, SM-2, SM-3) will fit in P90 sized holes with the mini-humbucker mounting rings for LP deluxe's. Haven't measured it though.
And of course, DiMarzio makes a few P90 sized humbuckers in addition to their minis.
dani
Active member
Re: Seymour Duncan P90-sized humbuckers
iirc, evan once said that sd's next project after fitting a p-90 in a humbucker cover (phat cats) is having a bucker in a p-90 housing. i am not sure if he meant it as a custom shop model or it will be available commercially, but these are listed under custom shop on the duncan website. maybe evan can shed some light on this.
iirc, evan once said that sd's next project after fitting a p-90 in a humbucker cover (phat cats) is having a bucker in a p-90 housing. i am not sure if he meant it as a custom shop model or it will be available commercially, but these are listed under custom shop on the duncan website. maybe evan can shed some light on this.
Zhangliqun
Questionologist
Re: Seymour Duncan P90-sized humbuckers
No need to measure, it's true. The LP Deluxe was designed as a replacement for P90-equipped LP's so rather than make a brand new routing pattern or template, they designed the mini-hum ring so the mini-hum could be a direct replacement on a P90 LP.
Some LP lovers buy Deluxes and replace the mini-hums with P90's.
chill said:
No need to measure, it's true. The LP Deluxe was designed as a replacement for P90-equipped LP's so rather than make a brand new routing pattern or template, they designed the mini-hum ring so the mini-hum could be a direct replacement on a P90 LP.
Some LP lovers buy Deluxes and replace the mini-hums with P90's.
chill
New member
Re: Seymour Duncan P90-sized humbuckers
Cool. In that case the rio grande minibucker (bottom of the page of buckers) might be a good pick for P-90 sized HB.
Do you know how the mini humbuckers mount to the body? Is it just the screw on either end? And does that mean they are not height adjustable?
Zhangliqun said:
Cool. In that case the rio grande minibucker (bottom of the page of buckers) might be a good pick for P-90 sized HB.
Do you know how the mini humbuckers mount to the body? Is it just the screw on either end? And does that mean they are not height adjustable?
danglybanger
ReelItInologist
Re: Seymour Duncan P90-sized humbuckers
you need a special pickup ring, found on LP deluxes in the 70s.
Try ebay? does anyone still make em?
slade
you need a special pickup ring, found on LP deluxes in the 70s.
Try ebay? does anyone still make em?
slade
the guy who invented fire
Fuzzy. Guitars
Re: Seymour Duncan P90-sized humbuckers
it shoudl be mentioned that the Rio Grande Baby Buckers that are made to reto fit in a P-90 rout requier a deeper route that P-90...you will have to make the hole about 3/8 of an inch deeper...doing this will make it hard to put P-90 or any other Mini bucker back in the guitar!
it shoudl be mentioned that the Rio Grande Baby Buckers that are made to reto fit in a P-90 rout requier a deeper route that P-90...you will have to make the hole about 3/8 of an inch deeper...doing this will make it hard to put P-90 or any other Mini bucker back in the guitar!
