sh11 custom custom

[tommo]

[FONT=Arial, Helvetica, sans-serif]hi all
i have come across an alleged SH 11 custom custom humbucker the thing i find suspect is it has braided single conductor cable
and a label with CCL i have looked every where but i cant find any ifno the only stuff i can find is for 4 wire conductor wire
any help would be appreciated[/FONT]

 

[soulforger]

I'd suspect that this one was original equipment on a guitar like an ESP Horizon or Schechter Tempest, some of these models came stock with a Custom Custom at times and since the guitar didn't come with coil splits the 2 con wire was used, or it's an older example of this model?

 

[Mincer]

Please ask these type of posts in the dedicated thread, Is this a real Seymour Duncan to keep the knowledge in one place.

 

[beaubrummels]

I thought back when those stickers were in use, the default for standard-spaced humbuckers was 2-cond. braided and 4-cond. was a Shop Floor Custom order?

 

[ErikH]

I would contact SD Customer Service. I don't recall seeing a sticker like that on any SD pickup. The ones I saw with the model and initial of the winder had much bigger letters and looked like they were stamped on, not printed. All the Custom Customs I've had have been 4-conductor. Customer Service can confirm that one.

 

[beaubrummels]

I would contact SD Customer Service. I don't recall seeing a sticker like that on any SD pickup. The ones I saw with the model and initial of the winder had much bigger letters and looked like they were stamped on, not printed. All the Custom Customs I've had have been 4-conductor. Customer Service can confirm that one.

I have a TB59BL, the sticker looks just like the CCL above.

 

[Artie]

If it's correct, the "L" means it was wound by Lidia Daniel.