single Phat Cat wiring
- Thread starter jakew
- Start date
Re: single Phat Cat wiring
welcome to the forum!!
solder the braided wire to the back of the volume pot for a ground and use the center conductor as the hot wire then follow the rest of this schematic. basically replace the black with the braid and the white with the center conductor
http://www.seymourduncan.com/website/support/schematics/S_1singlecoil_1vol_1tone.html
welcome to the forum!!
solder the braided wire to the back of the volume pot for a ground and use the center conductor as the hot wire then follow the rest of this schematic. basically replace the black with the braid and the white with the center conductor
http://www.seymourduncan.com/website/support/schematics/S_1singlecoil_1vol_1tone.html
