SSH wiring?

[Little Boi]

Hi, haven’t posted here in a little bit. I want to convert my sss strat into an hsh eventually, so I’m putting in the neck pickup first. I already have a single coil out. Is there a diagram online for how to hook it up. It’s a dragonfire hot rails neck pickup, so it might have different wires. Any help would be appreciated.

 

[Mincer]

Re: SSH wiring?

The first step would be to figure out the wires in the neck pickup. I am not familiar with it- but the wiring is the same as using an SSS setup. You have to figure out what the series link cables are, connect them, and tape them off. Then hot goes to the switch, and ground to ground.

 

[Little Boi]

Re: SSH wiring?

Thanks. Dragonfire gives you a little note as a diagram for the pickup. I’ll send a photo if I can.

 

[Little Boi]

Re: SSH wiring?

Here I took these photos and make a quick post.http://imgur.com/a/eUgn6Y9

 

[Mincer]

Re: SSH wiring?

So, it looks like (for the neck pickup) white & green are connected and taped off, red goes to ground, and black goes to hot. If this is out of phase with your other pickups, reverse red and black.