SSL-3 for neck position

[david5150]

Hello:

I'm looking for the SSL-3 pickup for neck position. I can only find in the web the model for middle and bridge position.

Is there a specific model for neck positioning?

Bridge:
https://www.seymourduncan.com/pickup/hot-strat?__uuid_ref=5ccaba991a606?__uuid_ref=5ccaba991a64e

Middle:
https://www.seymourduncan.com/picku...id_ref=5ccabaceca960?__uuid_ref=5ccabaceca9a0

 

[Mincer]

Re: SSL-3 for neck position

Welcome to the forum!

I believe the neck is the same as the bridge. I don't see a reference for a specific neck model.

 

[jeremy]

Re: SSL-3 for neck position

the wind of the ssl3 is the same, the only option is to get a rw/rp if you wanted

 

[david5150]

Re: SSL-3 for neck position

So...same model as bridge pickup?

This is strange because there is no specific model for the position of the neck in web.

 

[jeremy]

Re: SSL-3 for neck position

correct but not all that strange. there is only the ssl3 and the ssl3 rw/rp. just like there is only the ssl1 and ssl1 rw/rp. or the ssl4 and ssl4 rw/rp etc... back in the 50's-70's fender made a strat pup and put the same one in each position. at some point they started using a rw/rp middle pup to get humcancelling in the notch positions but there were decades of the same pup being used in all three positions.