Feel free to ask any an all questions. Im open to offers but I think the prices are pretty fair so Im inclined to let this thing ride out a couple weeks or so before I really consider them. Prices paypalled/shipped CONUS
Fender MIM tobacco burst body - $90 - with trem, claw, springs, jack, white backplate, neckplate, screws. One large nick/chip on front, at the top, above bridge pickup, in the black area. Big chip? yes. Look bad? not really. Through the finish but NOT into the wood. repeat, not into the wood. Its in the black part which helps. Other than that, very good condition. Is the trem MIM? not sure - I though MIM saddles were stamped "Fender" but these arent. Maybe not all of them are stamped? Or maybe this is aftermarket... I have no idea.
Fender MIM Neck - SOLD -
Custom Neck, rosewood board - SOLD -
Fender pickups: 1 USA Standard bridge pickup $18, 1 Tex Mex $18, and 1 MIM - $15 - I soldered an extension piece onto one lead of the AM Standard to give me more room - but this was not necessary. You can cut of the extension if you don't like it, there is still enough length to reach the switch. Again, extension is soldered, not just taped.
GFS Mean 90 - $SOLD -
Black Strat Pickgaurd - $15 - with knobs, pots and switch wired up - CTS Pots! - full mechanical switch, white strat knobs. This stuff has been played! the knobs are naturally dirty. If you have a relic guitar, or just an older strat thats on its way to being a relic - this setup will match perfectly. No fake relicing here, this is the real deal! includes screws
The black nickle finish is REALLY hard to photo well. It looks closer to chrome than it does in these pictures. The stock photos on the GFS site are a great representation, actually. Check those if you're curious about the look. Really neat - would go great on a black guitar... or with an uncovered black humbucker...
Fender MIM tobacco burst body - $90 - with trem, claw, springs, jack, white backplate, neckplate, screws. One large nick/chip on front, at the top, above bridge pickup, in the black area. Big chip? yes. Look bad? not really. Through the finish but NOT into the wood. repeat, not into the wood. Its in the black part which helps. Other than that, very good condition. Is the trem MIM? not sure - I though MIM saddles were stamped "Fender" but these arent. Maybe not all of them are stamped? Or maybe this is aftermarket... I have no idea.
Fender MIM Neck - SOLD -
Custom Neck, rosewood board - SOLD -
Fender pickups: 1 USA Standard bridge pickup $18, 1 Tex Mex $18, and 1 MIM - $15 - I soldered an extension piece onto one lead of the AM Standard to give me more room - but this was not necessary. You can cut of the extension if you don't like it, there is still enough length to reach the switch. Again, extension is soldered, not just taped.
GFS Mean 90 - $SOLD -
Black Strat Pickgaurd - $15 - with knobs, pots and switch wired up - CTS Pots! - full mechanical switch, white strat knobs. This stuff has been played! the knobs are naturally dirty. If you have a relic guitar, or just an older strat thats on its way to being a relic - this setup will match perfectly. No fake relicing here, this is the real deal! includes screws
The black nickle finish is REALLY hard to photo well. It looks closer to chrome than it does in these pictures. The stock photos on the GFS site are a great representation, actually. Check those if you're curious about the look. Really neat - would go great on a black guitar... or with an uncovered black humbucker...
Last edited:
