Stratocaster JUST Series Wiring

[beowolverine93]

I know most people go with the parallel/series push-pull option, but I don't want the parallel wiring and I can't find a schematic for JUST series. Anyone know where to find a wiring diagram for the following:

Pickup Configuration: SSS

Pickup Switching: 5-Position Blade:

Position 1. Bridge Pickup
Position 2. Bridge and Middle Pickups (In Series)
Position 3. Middle Pickup (RWRP)
Position 4. Middle and Neck Pickups (In Series)
Position 5. Neck Pickup

Controls:

Master Volume
Tone 1. (Neck Pickup)
Tone 2. (Middle Pickup)

 

[Uncle Fred]

Re: Stratocaster JUST Series Wiring

This is close

 

[Funkfingers]

Re: Stratocaster JUST Series Wiring

^
The ol' Dan Armstrong thing.

In a second varition, Armstrong devised a circuit using two DPDT and one DP3T switch to permit all possible coil permuations.

Series only interconnection is half way towards the Brian May Red Special circuit. In my opinion, the phase reversal capability is an essential ingredient.

If you are interested in going the BMRS route, kits are available that include all of the switches and a dedicated scratchplate.