That rehab Parker P-38 (HSS) with a SD JB and 2 Classic stacks, with coil isolating switches for each is a success, BUT there is a real noticeable "bump/noise" when I use ANY switch. I'm using DPDT, for the splitting, but only one side.
All pups and switches are ground to the volume knob (500k). All other grounds were either not touched or carefully re-soldered. I must be missing something obvious.....:eyecrazy:
All pups and switches are ground to the volume knob (500k). All other grounds were either not touched or carefully re-soldered. I must be missing something obvious.....:eyecrazy:
