hellrider77
New member
can someone post a wiring diagram for a dmx super 2 in the bridge and a hs-3 in the neck of a tele, and please tell which color wires go where.
tele dimarzio wiring
- Thread starter hellrider77
- Start date
octavedoctor
New member
Re: tele dimarzio wiring
DiMarzios use the same colour coded wire as Seymours but the protocol is different. Usually the coil bridge (wire connecting the two coils in a humbucking pair and which is used to split the coils occasionally) is black-white. Earth is usually green, hot (signal) is red. Sometime the coil bridge has to be swapped with the earth/signal cables for polarity matching. Because the HS-3 is a stack, you will probably be using the standard wiring.
The DMX Super2 I don't know about. Is this a Dimarzio? If it is, and it has four core cable it will have the same polarity and colour coding as the HS-3.
DiMarzios use the same colour coded wire as Seymours but the protocol is different. Usually the coil bridge (wire connecting the two coils in a humbucking pair and which is used to split the coils occasionally) is black-white. Earth is usually green, hot (signal) is red. Sometime the coil bridge has to be swapped with the earth/signal cables for polarity matching. Because the HS-3 is a stack, you will probably be using the standard wiring.
The DMX Super2 I don't know about. Is this a Dimarzio? If it is, and it has four core cable it will have the same polarity and colour coding as the HS-3.