lowenzz
New member
Baja Tele, replaced neck with an uncovered pup, replaced bridge pup with an overwind. 4way switch & S1 phase switch. Sounds great, but....
static white noise unless the control plate is being touched, bridge makes no different.
No plate on underside of bridge pup. I twisted both pups and outputjack wires. Could this be causing noise, I thought it helped minimize it.
I've reflowed all my grounds. pups work great in all positions like they should.
I tried a bit of copper to the ground on the tone pot to the screw hole for the control plate. No difference.
The S1 will be going away. I have new pots and caps ready to go. But I would like to cure this problem before moving forward.
Thanks Low
static white noise unless the control plate is being touched, bridge makes no different.
No plate on underside of bridge pup. I twisted both pups and outputjack wires. Could this be causing noise, I thought it helped minimize it.
I've reflowed all my grounds. pups work great in all positions like they should.
I tried a bit of copper to the ground on the tone pot to the screw hole for the control plate. No difference.
The S1 will be going away. I have new pots and caps ready to go. But I would like to cure this problem before moving forward.
Thanks Low