Tremolo - BlocKed or Not
- Thread starter Tim
- Start date
Vasshu the humanoid typhoon
Unseen
Re: Tremolo - BlocKed or Not
....is this the month of blocking trems???
Just put in a block of wood that will fit between then tremblock and the body, no upward movement, and lots of contact, expect a stiffer playing guitar after that.
....is this the month of blocking trems???
Just put in a block of wood that will fit between then tremblock and the body, no upward movement, and lots of contact, expect a stiffer playing guitar after that.
Benjy_26
25's Nemesis
Re: Tremolo - BlocKed or Not
You don't have to block it, just set it flat against the guitar's face and install all five springs. This should transferr more energy and vibration to the guitar's body without having to block it.
I usually have mine floating at the rear edge about 1/8" with three springs, but I use mine a lot.
You don't have to block it, just set it flat against the guitar's face and install all five springs. This should transferr more energy and vibration to the guitar's body without having to block it.
I usually have mine floating at the rear edge about 1/8" with three springs, but I use mine a lot.
Zerberus
Baron Von Shred
Re: Tremolo - BlocKed or Not
What you can also do is just set the trem for down use only, this works particularly well on vintage trems. You keep the tonal effect of the springs, but have more solid contact with the body increasing sustain and fattening up the tone in most cases. I personally always set vintage trems up "flat", i.e. this way (on my own axes). In essence, all you do is tighten the springs in the back until the plate rests flat when tuned to pitch, then add 1 oir 2 turns per screw to suit your taste (how "easy" it sould be to go down with the wang bar). Then reset string hight and reintonate
:laugh2: :laugh2: :laugh2:
Oh Well, more Jacksons for me I guess :friday:
Tim said:
What you can also do is just set the trem for down use only, this works particularly well on vintage trems. You keep the tonal effect of the springs, but have more solid contact with the body increasing sustain and fattening up the tone in most cases. I personally always set vintage trems up "flat", i.e. this way (on my own axes). In essence, all you do is tighten the springs in the back until the plate rests flat when tuned to pitch, then add 1 oir 2 turns per screw to suit your taste (how "easy" it sould be to go down with the wang bar). Then reset string hight and reintonate
I´m starting to wonder myself. Weekly this question is normal, but DAILY? :saeek: ? I think I´m gonna copy my nex "trem -blocking post" to the clipboard and just paste it in when someone asks againRid said:
:laugh2: :laugh2: :laugh2: Oh Well, more Jacksons for me I guess :friday:
