Triple Ceramic Custom

'59

Active member
Has anybody tried a triple ceramic custom yet, with the double thick ceramic and the flanking magnets? What about a double thick alnico variety magnet with or without flanking magnets?

This sounds like a good area for experimentation, but as a high school I don't have the money to spend on this hobby just to experiment.
 
Re: Triple Ceramic Custom

There’s a version of this called the holeshot (DD-5) that came from the custom shop on some Dean/DBZ guitars. It’s also slightly overwound.

I’ve always wanted one but never had the money when one came up. We should get a group buy here on the forum going for a run of them.
 
Re: Triple Ceramic Custom

I've done triple ceramic, alnico in the center with ceramic flanks, and double thick alnico. Triple ceramic is hella hot, alnico in the center is good because it stays organic with some ceramic bite, and double thick alnico is awesome because it's hotter and juicier.
 
Re: Triple Ceramic Custom

BW is three ceramics? Didn’t know that. FWIW Mine don’t seem any hotter compared to Distortion or Custom or 500T. It’s a very flat sterile pickup, IME.
 
Re: Triple Ceramic Custom

BW is three ceramics? Didn’t know that. FWIW Mine don’t seem any hotter compared to Distortion or Custom or 500T. It’s a very flat sterile pickup, IME.
My BW-equipped guitar doesn't feel much hotter than my other guitar with a Distortion, but when I track DI's, I can see it's definitely hotter than the DD in the waveform.
 
Last edited:
Re: Triple Ceramic Custom

Have you compared it to an Invader yet?

Sorry I haven’t. I don’t happen to have an invader. Reviews tend to regard the invader as pretty “thick” sounding and that isn’t a direction I’ve wanted to go, yet.
 
Re: Triple Ceramic Custom

Have you compared it to an Invader yet?


I have an invader in a firebird type guitar, and a black winter in an SG. Probably not the best basis for comparison, but they are similar. The Invader is darker, the mid range is about the same. I removed the big hex caps from the Invader and replaced them with dimarzio style set screws and now they sound even closer. The invader is still darker though. Could be the difference in guitars i suppose
 
Re: Triple Ceramic Custom

I had custom made 10k awg 42 with a standard A5: i wanted a PAF pushed to the limits, but it was a bit bland. Then i tried a ceramic and a A8, both did not score with too much mids. Than the winder sent me a double thick A5, which i liked best: hot, still brite, slightly scooped and a nice growl.
 
Back
Top