Triple Shot Wiring to Lace Dually?

[goarmy1]

I am looking to wire up a set of Chrome Dome Duallies to my Triple shot rings. Need to know what wires go where. The Dually pup has 6 wires coming from it: Orange=Hot (start of north coil), White=finish of north coil and Green=ground/north coil. Orange/Black=Hot (start of south coil), White/Black=finish of south coil and Green=ground/south coil. As the Duncan diagram uses 5 wires, you will need to tie the Green/grounds together and treat them as one. So how would this connect to the triple shot. Thanks for the help. I have a custom Tele Variax that had p-rails in it but I want more single coil options so I think these will work in theory they are two single coils put together and can be split to give you two singles on each pickup. Thanks for the help. The P-Rails will most likely go in a Les Paul.

 

[hamerfan]

Re: Triple Shot Wiring to Lace Dually?

Orange=Hot (start of north coil), White=finish of north coil and Green=ground/north coil. Orange/Black=Hot (start of south coil), White/Black=finish of south coil and Green=ground/south coil. As the Duncan diagram uses 5 wires, you will need to tie the Green/grounds together and treat them as one. So how would this connect to the triple shot.

Take out the manual of your SD pickups and do the same listing as above. Then compare that sheet with your wiring manual of the Triple shot. And you are done!

 

[goarmy1]

Re: Triple Shot Wiring to Lace Dually?

Got it I think. If anyone else is wondering, or could correct me if wrong. Orange = SD's Black
White= White
Orange/Black = Green
White/Black = Red
Green is the Ground.