I assumed truss rod nuts were pretty standard..?? I tried to adjust the truss on my Charvel bass and the only tr tool I have is from my Gibby LP and it didnt fit. Are there diff sizes? I guess Ill have to buy one as none of the wrenches or otherwise seem to fit into the groove to get on the nut..
Truss rod tool
- Thread starter BloodRose
- Start date
threechordcharlie
RedTruckologist
Re: Truss rod tool
Many different sizes out there. I keep a metric set and a standard set.
Many different sizes out there. I keep a metric set and a standard set.
Chris of Arabia
Desert RATT
Re: Truss rod tool
Yep, there are all sorts out there. Some need a socket, some an allen key and each in a variety of sizes. There are even variations after that to handle different ways in which they are accessed. Try checking on StewMac to see how many options they offer.
Yep, there are all sorts out there. Some need a socket, some an allen key and each in a variety of sizes. There are even variations after that to handle different ways in which they are accessed. Try checking on StewMac to see how many options they offer.
Re: Truss rod tool
3 popular sizes are:
Charvel 80s/early 90s Japan (and other early 90s japan stuff, like my mij ibanez 540s) = 7mm
Late 90s japan, at least late 90s ESP, modern ESP, all LTD, many other Koreans, & some if not all 80s matsumoku japan stuff = 8mm
American = mostly 1/4"
note that these three are NOT interchangeable in any way
SO:
****Charvel 80s/early 90s Japan (and other early 90s japan stuff, like my mij ibanez 540s) = 7mm**** - probably this. though only 99% sure, because of it being a bass. most basses use guitar sizes, so it's highly unlikely to differ, but still a slight chance
btw, when shopping for a 7mm - avoid stewmac and go to allparts. they have em, stew didn't, at least last week when I ran into that exact issue... also, though nobody on this forum would properly tell me, and lots of guys ridiculed me for trying to find it under another name, here's what that type of tool is properly called (who knows you might find one locally?) : -- 7 MM BOX WRENCH --
PS i bought it specifically for an mij charvel, though it also fit my ibby to my pleasant surprise. 7mm is almost certainly the right size, unless you've got a supersized truss rod... also, 7mm's shape is slightly different (like a "bullet", but with a hexlike pattern continuing down the bullet tip) and it sits strangely, so trying to fit other wrenches to it, you get the feeling that it couldn't POSSIBLY be as small as 7mm - but that's exactly what gives it away as a 7mm one. well, that and google
3 popular sizes are:
Charvel 80s/early 90s Japan (and other early 90s japan stuff, like my mij ibanez 540s) = 7mm
Late 90s japan, at least late 90s ESP, modern ESP, all LTD, many other Koreans, & some if not all 80s matsumoku japan stuff = 8mm
American = mostly 1/4"
note that these three are NOT interchangeable in any way
SO:
****Charvel 80s/early 90s Japan (and other early 90s japan stuff, like my mij ibanez 540s) = 7mm**** - probably this. though only 99% sure, because of it being a bass. most basses use guitar sizes, so it's highly unlikely to differ, but still a slight chance
btw, when shopping for a 7mm - avoid stewmac and go to allparts. they have em, stew didn't, at least last week when I ran into that exact issue... also, though nobody on this forum would properly tell me, and lots of guys ridiculed me for trying to find it under another name, here's what that type of tool is properly called (who knows you might find one locally?) : -- 7 MM BOX WRENCH --
PS i bought it specifically for an mij charvel, though it also fit my ibby to my pleasant surprise. 7mm is almost certainly the right size, unless you've got a supersized truss rod... also, 7mm's shape is slightly different (like a "bullet", but with a hexlike pattern continuing down the bullet tip) and it sits strangely, so trying to fit other wrenches to it, you get the feeling that it couldn't POSSIBLY be as small as 7mm - but that's exactly what gives it away as a 7mm one. well, that and google
Last edited:
Re: Truss rod tool
why yep i do now... strangely, 0% thanks to you and your buddy LReese. though you claimed to try, did you not? ...helpless & trying for sarcastic as usual, I see. rock on, mate!
why yep i do now... strangely, 0% thanks to you and your buddy LReese. though you claimed to try, did you not? ...helpless & trying for sarcastic as usual, I see. rock on, mate!
Last edited:
Re: Truss rod tool
No, solved my issue myself & was (imho, understandably) unenthused about clicking back into that hissing match....sorry if your answer was useful and i missed it
No, solved my issue myself & was (imho, understandably) unenthused about clicking back into that hissing match....sorry if your answer was useful and i missed it
aleclee
Major General GAS
Re: Truss rod tool
Wackiest I've come across is Parker. It takes a Torx T27. :smack: Given that it uses piano wire for a "truss rod", I suppose that's par for the course.
astrozombie
KatyPerryologist
Re: Truss rod tool
My gibson guitars both use 5/16... or 8 mm.
My gibson guitars both use 5/16... or 8 mm.