Uncle Funk's Junk Trunk #1 - WTT pickups, pedals

[Funkfingers]

Looking to trade some of my "non-essential" pickups and the odd pedal for other pickups, magnets and any other bits 'n' pieces.

OUTGOING
DiMarzio DP145BK Will Power neck PU, black, brand new in box, unopened packaging. Model and exchange policy stickers intact.
EMG-35HZ "Soapbar" bass guitar pickup, black with 5-pin cable x2
* Gorn
MXR M-102 Dyna Comp compressor pedal, immaculately clean, boxed, no PSU, ex-Lu B. (Sorry, Lu.)
PRS SE P90-style single coil x2, lightly used.
SD STKP-1b P90 Stack, vgc
SD SRKP-1n P90 Stack, vgc
Squier Silver Series Stratocaster pickups, scratchplate and electronics assembly, complete, original, black plastics, LEFT HANDED.
Assorted other odds 'n' sods. PM with requests. I'll rummage to see what is available.

REQUIRED
EMG-HA or -60A humbucker. Must be black and 3-pin Quik Connect wiring. Cabling and controls not required.
SD Antiquity or Custom P90s
SD Antiquity II "Surfer" neck posution Stratocaster single coil.
Tremol-No vibrato bridge locking device

If you have any interesting, unusual or plain weird stuff to offer, try me. The worst that I can say is no, thank you. Pics to follow.

UFJT plc, Wales, England.

 

[fakiekid]

Re: Uncle Funk's Junk Trunk #1 - WTT pickups, pedals

You looking for an SP-903? Got one in Cream, not sure on position will look later, wil sell for £50?

 

[Funkfingers]

Re: Uncle Funk's Junk Trunk #1 - WTT pickups, pedals

Interested. PM me with address and payment details.

Cream cover and N or B position not a problem. Just need to know output cable length.

 

[Kam]

Re: Uncle Funk's Junk Trunk #1 - WTT pickups, pedals

I googled that Dimarzio you have up there and this thread was the third hit on Google. Unbelievable.

Do you have any interesting, decent quality, neck position Strat single coils you want to unload?

I assume you weren't interested in any of the junk I sent you a PM about? Obviously no worries if you weren't. Just curious. :beerchug:

 

[Funkfingers]

Re: Uncle Funk's Junk Trunk #1 - WTT pickups, pedals

I googled that Dimarzio you have up there and this thread was the third hit on Google. Unbelievable.

Do you have any interesting, decent quality, neck position Strat single coils you want to unload?

I assume you weren't interested in any of the junk I sent you a PM about? Obviously no worries if you weren't. Just curious. :beerchug:

UK availability of the DiMarzio Will Power HB seems to come and go in waves.

The only other Strat pickups I have are three Fender Am STD single coils. Any good?

Can't remember what was on your PM clear out list. Wiped majority of PMs at start of this year. Sorry.

 

[Kam]

Re: Uncle Funk's Junk Trunk #1 - WTT pickups, pedals

UK availability of the DiMarzio Will Power HB seems to come and go in waves.

The only other Strat pickups I have are three Fender Am STD single coils. Any good?

Can't remember what was on your PM clear out list. Wiped majority of PMs at start of this year. Sorry.

Lemme check out some stuff about the Strat pup and get back to you. I'm not really desperate to replace the one I have, I've just been getting curious about what more I could squeeze out of that position on my Pacifica. What kind of price would you be looking for? Would you even sell a single pickup or would you rather hold off and sell as a set?

 

[Funkfingers]

Re: Uncle Funk's Junk Trunk #1 - WTT pickups, pedals

I've just been getting curious about what more I could squeeze out of that position on my Pacifica. What kind of price would you be looking for? Would you even sell a single pickup or would you rather hold off and sell as a set?

I'll tell you what I have that might suit your Pacifica, sir.

I have a neck/centre pair of Ibanez single coils from an SAS36FM. These measure 6.75kOhms and have alnico rod magnet polepieces that are spaced to align properly with the strings. The screw holes at either end of each vulcanised fibreboard bobbin are meant for a small direct mounting wood screw. These will require widening to accept a typical "Fender" height adjustment screw.

280mm cable on each pickup (both conductors). Black plastic covers. The polepiece spacing issue means that you have no choice but to use these. The centre position PU is RP/RW.

I have no expectations of ever using these pickups again. A nominal sum to cover postage and packing would be enough.

 

[Left_Hand_Strat]

Re: Uncle Funk's Junk Trunk #1 - WTT pickups, pedals

Im tempted with those Jaguar Pups.... any good for a strat?

(PM me if you like)

 

[Funkfingers]

Re: Uncle Funk's Junk Trunk #1 - WTT pickups, pedals

Im tempted with those Jaguar Pups.... any good for a strat?

(PM me if you like)

The Fender CIJ Jaguar pickups are exactly the same as the pickups that used to go in Fender MIJ vintage re-issue Stratocasters except for three things;
1) The polepiece magnets are of equal height rather than staggered
2) The output conductors are at one end of the bobbin rather than on a lip along one edge of the lower fibreboard plate.
3) The screw holes in the ends of the bobbin are intended to allow a wood screw to pass directly through. For use with a typical Fender height adjustment screw, a thread would need to be cut in the fibreboard.

IMO, the CIJ Jag PUs would be interesting for experimentation. From this, you can probably guess that I do not rate them. Obviously, they are better than some godawful steel studs 'n' underslung ceramic magnet types. I do not imagine that the Jag PUs will be any better than your Wilkinson units.

 

[Left_Hand_Strat]

Re: Uncle Funk's Junk Trunk #1 - WTT pickups, pedals

The Fender CIJ Jaguar pickups are exactly the same as the pickups that used to go in Fender MIJ vintage re-issue Stratocasters except for three things;
1) The polepiece magnets are of equal height rather than staggered
2) The output conductors are at one end of the bobbin rather than on a lip along one edge of the lower fibreboard plate.
3) The screw holes in the ends of the bobbin are intended to allow a wood screw to pass directly through. For use with a typical Fender height adjustment screw, a thread would need to be cut in the fibreboard.

IMO, the CIJ Jag PUs would be interesting for experimentation. From this, you can probably guess that I do not rate them. Obviously, they are better than some godawful steel studs 'n' underslung ceramic magnet types. I do not imagine that the Jag PUs will be any better than your Wilkinson units.

I'm tempted because i'm interested....

I'm going to PM you a conversation shortly.

 

[Funkfingers]

Re: Uncle Funk's Junk Trunk #1 - WTT pickups, pedals

Bump for my stuff.

I'm going to PM you a conversation shortly.

Surely, one person can only PM half of a conversation? :naughty:

 

[Funkfingers]

Re: Uncle Funk's Junk Trunk #1 - WTT pickups, pedals

Well. No further business has materialised for a week. Time to close Trunk #1.