Urgent Help !

eastwood

New member
Hi all,


I bought an ESP/LTD M1 Tiger off ebay and its a great guitar apart from the wiring.....its all wrong !

I think the seller removed his pickup and replaced it with the original pickup withought wiring it properly.....so this is what we have now :

It has a single SD Humbucker and Volume Control

I have the following wires :

SD Humbucker - white, red, black, green and silver

Earth wire from the trem block not attached to anything !

2 wires from the input jack

500 k volume pot with 3 terminals (the 3rd terminal is bent up to touch the volume pot for some reason)

Please tell me how to wire this up !

Many many thanks....

Daz
 
Re: Urgent Help !

Solder the red and white and tape them off. Connect the black to 1st pot terminal. Solder the silver ( bare ) and wire from tremolo to bottom of volume pot ( the one that 3rd terminal bent and soldered to ).
Connect the + from input jack to middle terminal of volume pot.
connect the - from input jack to bottom of volume pot.

you're done. and rock on.
 
Back
Top