Using an attenuator and a volume boost?
- Thread starter Simon_F
- Start date
the guy who invented fire
Fuzzy. Guitars
Re: Using an attenuator and a volume boost?
you can do that all day long...an attenuator does not change the way an amp works or sounds...it just brings the over all lever down. You'll be fine.
you can do that all day long...an attenuator does not change the way an amp works or sounds...it just brings the over all lever down. You'll be fine.
stevie_bees
Cat In The Hatministrator
Re: Using an attenuator and a volume boost?
I would have thought it would attenuate the overall o/p. If your 2 channels are aet at different volumes or you boost it, it's still going to be the same just quieter overall. That's what I reckon anyway!
I would have thought it would attenuate the overall o/p. If your 2 channels are aet at different volumes or you boost it, it's still going to be the same just quieter overall. That's what I reckon anyway!
PUCKBOY99
Irish Flagologist
Re: Using an attenuator and a volume boost?
Are you asking: If you have an attenuator hooked up to the amp & THEN hit a pedal (boost, EQ...whatever), will the volume level rise???
I don't think so, but I can try it out for you if you want.....You'll probably "hear" the pedal in your tone, but the volume will remain the same.
I think.............
Are you asking: If you have an attenuator hooked up to the amp & THEN hit a pedal (boost, EQ...whatever), will the volume level rise???
I don't think so, but I can try it out for you if you want.....You'll probably "hear" the pedal in your tone, but the volume will remain the same.
I think.............
Last edited:
suislidE03
New member
Re: Using an attenuator and a volume boost?
Yes, the more you attenuate the less of a volume boost you will get. If i set the attenuation to almost max, even upping the volume of my laney from say 3-5 wont be much louder at all. So basically it will compress the volume changes more at higher levels of attenuation. It will work, but it wont be as noticable.
Yes, the more you attenuate the less of a volume boost you will get. If i set the attenuation to almost max, even upping the volume of my laney from say 3-5 wont be much louder at all. So basically it will compress the volume changes more at higher levels of attenuation. It will work, but it wont be as noticable.
heavydutysg135
New member
Re: Using an attenuator and a volume boost?
The only way that I know you can achieve a volume boost with a saturated power amp section would be to use the attenuator as a load box (my hotplate can be used this way). Go from the line level out to a power amp with alot of clean headroom. In between the load box and the power amp you put your volume and it will raise the volume as long as the power amp is not being saturated too much. This is off topic but I have read that the best place to put a flanger, phaser, or delay is between the load box and the power amp. I am pretty sure this is where Van Halen used his phaser to get his famous sound.
The only way that I know you can achieve a volume boost with a saturated power amp section would be to use the attenuator as a load box (my hotplate can be used this way). Go from the line level out to a power amp with alot of clean headroom. In between the load box and the power amp you put your volume and it will raise the volume as long as the power amp is not being saturated too much. This is off topic but I have read that the best place to put a flanger, phaser, or delay is between the load box and the power amp. I am pretty sure this is where Van Halen used his phaser to get his famous sound.
Simon_F
Super Moderator
Re: Using an attenuator and a volume boost?
Thanks guys. I guess it depends on the two factors - how far you saturate the power amp and how much attenuation you apply. Hitting a saturated power amp with a boost must be akin to hitting a a saturated pre-amp with a boost - i.e. you get more gain rather than more volume. So as you turn up the power amp, the less effective the volume boost will be. But there must be a sweet spot where you're driving the power amp for crunchy rhythm, but can still get a slight volume increase with the boost. Sorry, I'm rambling here.
I'm just thinking it all through as I'm gassing for an attenuator to use with my Jubilee. :scratchch
Thanks guys. I guess it depends on the two factors - how far you saturate the power amp and how much attenuation you apply. Hitting a saturated power amp with a boost must be akin to hitting a a saturated pre-amp with a boost - i.e. you get more gain rather than more volume. So as you turn up the power amp, the less effective the volume boost will be. But there must be a sweet spot where you're driving the power amp for crunchy rhythm, but can still get a slight volume increase with the boost. Sorry, I'm rambling here.
I'm just thinking it all through as I'm gassing for an attenuator to use with my Jubilee. :scratchch
Simon_F
Super Moderator
Re: Using an attenuator and a volume boost?
Terry,
Yes - In the past I've used a Boss GE-7 in the loop of my Jubilee to get a volume boost for solos. I was wondering whether this method would still be effective when using an attenuator too.
I guess it depends how hard you're working the power amp before you apply the boost.
I am mainly using the TM-60 with its handy little clean boost currently, but it's a sin to have this Jubilee sitting around idle. :newangel: :beerchug:
Simon
PUCKBOY99 said:
Terry,
Yes - In the past I've used a Boss GE-7 in the loop of my Jubilee to get a volume boost for solos. I was wondering whether this method would still be effective when using an attenuator too.
I guess it depends how hard you're working the power amp before you apply the boost.
I am mainly using the TM-60 with its handy little clean boost currently, but it's a sin to have this Jubilee sitting around idle. :newangel: :beerchug:
Simon
PUCKBOY99
Irish Flagologist
Re: Using an attenuator and a volume boost?
Yeah, you got that right Simon!
I normally use a wah...OD...EQ...amp.
I use the EQ as a mid boost & then hit the OD for leads.
Without the MASS running, of course it works great.....but with the MASS running, the volume is negligable. The tone changes, but the volume level stays basically the same.
FWIW...the MASS didn't get along with my Splawn & was a little better with the Marshall. I know Stevo used a MASS with his Plexi & likes it....maybe I didn't find the right "spot".
The MASS is a great unit & you get a lot of options with the lower cost, but it sounds like that Dr. Z might be a very good unit.
Good luck & crank that Jubilee UP !!!!:beerchug:
Yeah, you got that right Simon!
I normally use a wah...OD...EQ...amp.
I use the EQ as a mid boost & then hit the OD for leads.
Without the MASS running, of course it works great.....but with the MASS running, the volume is negligable. The tone changes, but the volume level stays basically the same.
FWIW...the MASS didn't get along with my Splawn & was a little better with the Marshall. I know Stevo used a MASS with his Plexi & likes it....maybe I didn't find the right "spot".
The MASS is a great unit & you get a lot of options with the lower cost, but it sounds like that Dr. Z might be a very good unit.
Good luck & crank that Jubilee UP !!!!:beerchug:
Similar threads
