Virgil Guitars
New member
Hey Everybody,
I've been building guitars for a few years and have been very excited to make our first bass guitar for the past couple of years. "Badwood" is just a mean lookin' thing with a murder of crows flying across the pickups and down the fingerboard, with leaves falling off an ol' maple tree. I, personally have never seen inlay that goes over pickups before in my life, so I may be the first one to have done this feat. I have also been proved wrong before (several times at my age!) It's loaded with SJB-5 Stack pickups and the STC-3P Tone Circuit... the pups are passive but have an impressive output! I have all the specs below the photos and a link to my page where you can buy it with any major credit card. It just went up for sale this morning! I only build around 5 guitars a year and this is your chance to own my first bass. Thanks so much!
Here are the specs:
Serial#: 001
Date completed: 9/9/15
Weight: 9.6 lbs.
Fingerboard:24 frets, 34" scale, 12" radius
Tuners: Black Gotoh's
Nut: Black Tusq® Nut
Pickups: Seymour Duncan's SJB-5 Passive Stack Jazz Bass Pickups
Electronics: Vol w/push/pull for slap bass, 3-Band Seymour Duncan Tone Circuits(TM), bass and treble (stacked pot)
Bridge: Schaller 5-string bass bridge with rollers
Body: Bookmatched Ovangkol top and back, with a 1-piece flamed maple center.
Neck: Rock Maple with 2 graphite reinforcement rods
Fretboard: Wenge
Headstock: Bass Stinger
Pickup covers: Ovangkol with inlay
Finishing: Hand-rubbed gunstock finish.
Extras: Tree inlaid on body with a murder of crows and leaves falling. Custom trussrod cover. Bass comes with a hardshell case, case candy and 5 year warranty.
Here is the buy link: http://www.virgilguitar.com/gallery/guitars/01-badwood/
Thanks, Virgil
I've been building guitars for a few years and have been very excited to make our first bass guitar for the past couple of years. "Badwood" is just a mean lookin' thing with a murder of crows flying across the pickups and down the fingerboard, with leaves falling off an ol' maple tree. I, personally have never seen inlay that goes over pickups before in my life, so I may be the first one to have done this feat. I have also been proved wrong before (several times at my age!) It's loaded with SJB-5 Stack pickups and the STC-3P Tone Circuit... the pups are passive but have an impressive output! I have all the specs below the photos and a link to my page where you can buy it with any major credit card. It just went up for sale this morning! I only build around 5 guitars a year and this is your chance to own my first bass. Thanks so much!
Here are the specs:
Serial#: 001
Date completed: 9/9/15
Weight: 9.6 lbs.
Fingerboard:24 frets, 34" scale, 12" radius
Tuners: Black Gotoh's
Nut: Black Tusq® Nut
Pickups: Seymour Duncan's SJB-5 Passive Stack Jazz Bass Pickups
Electronics: Vol w/push/pull for slap bass, 3-Band Seymour Duncan Tone Circuits(TM), bass and treble (stacked pot)
Bridge: Schaller 5-string bass bridge with rollers
Body: Bookmatched Ovangkol top and back, with a 1-piece flamed maple center.
Neck: Rock Maple with 2 graphite reinforcement rods
Fretboard: Wenge
Headstock: Bass Stinger
Pickup covers: Ovangkol with inlay
Finishing: Hand-rubbed gunstock finish.
Extras: Tree inlaid on body with a murder of crows and leaves falling. Custom trussrod cover. Bass comes with a hardshell case, case candy and 5 year warranty.
Here is the buy link: http://www.virgilguitar.com/gallery/guitars/01-badwood/
Thanks, Virgil
