STRATDELUXER97
Stratoblaster Tone Meister
Tonight I was playing through my Valvetronix head at the lower 1 watt and 15 watt settings through my Cyber Twin's 2x12 cabinet...I used the 1x12 Fender Tweed 12 setting with the Top Boost in...Got a great ZZ Top "La Grange" crunch with my strat....I then added a bit of spring reverb and a very slight of delay just to give the tone a sense of space...Got great tone and with the ability to easily sustain notes....The 15 watt setting was great..The 1 watt setting is cool because it lowers the volume,but the gain and compression stays the same,but at a bedroom volume...
I'm having so much fun with this amp...Getting really good tones is very easy....I kept the amp in "manual mode" tonight and just treated the entire amp as if it was actually just a Fender 57 little Tweed amp but with the ability to add reverb,delay,and the Vox Top Boost mode that gave the Tweed setting more growl and more gain...Very very cool indeed.... :dance:
Just love sharing this with you all...Hope I didn't bore ya? LOL
VERY COOL EFFECTS BUILT-IN
The effects in Valvetronix amps aren't an afterthought. Each one is a carefully crafted model of one of a variety of sought after classic and popular effects. These 10 essential pedals include Compressor, Acoustic Simulation, VOX Wah, Auto Wah, U-Vibe, Octave Divider, Treble Boost, valve Overdrive, Fat Overdrive and Fuzz. As pedals, they appear before the preamp models so they can drive the preamp in the same way they would in a traditional setup.
Valvetronix heads and combos also feature Modulation, Delay and Reverb effects sections, all of which can be used simultaneously. Just like in a pro guitar amp/rack, these effects sit between the preamp and power amp sections. The Modulation Section includes models of popular Chorus, Flanger, Phaser, Tremolo and Rotary effects. The Delay Section delivers Delay, Tape Echo and Multi-Head delay. A Tap button is provided for setting the delay time. The Reverb Section has three types, Spring, Plate and Room. Each section can be controlled independently from the top panel, or, in the case of Modulation, from the optional VC-4 Foot Controller.
"THE FRONT END, WHERE IT ALL STARTS
The preamp sections of the Valvetronix combos rely on Korg's proprietary REMS™ technology. REMS (Resonant structure and Electronic circuit Modeling System) accurately reproduces the complex circuitry in each of the modeled amplifier's signal paths and re-creates the tonality originally created in those amps. It even replicates their unique tone-stack networks so the Valvetronix' tone controls interact exactly as they do in the amplifiers being modeled! Play any one of the Valvetronix range and you'll hear and feel the difference immediately".
I'm having so much fun with this amp...Getting really good tones is very easy....I kept the amp in "manual mode" tonight and just treated the entire amp as if it was actually just a Fender 57 little Tweed amp but with the ability to add reverb,delay,and the Vox Top Boost mode that gave the Tweed setting more growl and more gain...Very very cool indeed.... :dance:
Just love sharing this with you all...Hope I didn't bore ya? LOL
VERY COOL EFFECTS BUILT-IN
The effects in Valvetronix amps aren't an afterthought. Each one is a carefully crafted model of one of a variety of sought after classic and popular effects. These 10 essential pedals include Compressor, Acoustic Simulation, VOX Wah, Auto Wah, U-Vibe, Octave Divider, Treble Boost, valve Overdrive, Fat Overdrive and Fuzz. As pedals, they appear before the preamp models so they can drive the preamp in the same way they would in a traditional setup.
Valvetronix heads and combos also feature Modulation, Delay and Reverb effects sections, all of which can be used simultaneously. Just like in a pro guitar amp/rack, these effects sit between the preamp and power amp sections. The Modulation Section includes models of popular Chorus, Flanger, Phaser, Tremolo and Rotary effects. The Delay Section delivers Delay, Tape Echo and Multi-Head delay. A Tap button is provided for setting the delay time. The Reverb Section has three types, Spring, Plate and Room. Each section can be controlled independently from the top panel, or, in the case of Modulation, from the optional VC-4 Foot Controller.
"THE FRONT END, WHERE IT ALL STARTS
The preamp sections of the Valvetronix combos rely on Korg's proprietary REMS™ technology. REMS (Resonant structure and Electronic circuit Modeling System) accurately reproduces the complex circuitry in each of the modeled amplifier's signal paths and re-creates the tonality originally created in those amps. It even replicates their unique tone-stack networks so the Valvetronix' tone controls interact exactly as they do in the amplifiers being modeled! Play any one of the Valvetronix range and you'll hear and feel the difference immediately".
Last edited:
