Vox Virage SC?
- Thread starter magillver
- Start date
Ashurbanipal
Well-known member
Yes, Jeremy, the higher end models were that, and the body itself was curved.
The high end ones were made in Japan in not significant quantities, so they're not as easy to come by, and can be $$. The triple coil pu versions were first, then later they developed those 'co-axe' pups, which are like P90s with a different noise-cancelling architecture, and also switchable options.
Then there were various Korean ones, also solid or semi hollow bodies, in single or double cut format (the latter has florentine cutaways). The hardware and pups seems to be also the same as the Japan models. Just the base MIK model had some sort of mini hums.
Some info: https://www.voxshowroom.com/equipment/guitars.html
The semi-hollow ones are actually mostly hollowed out, don't have a conventional centre block.
The high end ones were made in Japan in not significant quantities, so they're not as easy to come by, and can be $$. The triple coil pu versions were first, then later they developed those 'co-axe' pups, which are like P90s with a different noise-cancelling architecture, and also switchable options.
Then there were various Korean ones, also solid or semi hollow bodies, in single or double cut format (the latter has florentine cutaways). The hardware and pups seems to be also the same as the Japan models. Just the base MIK model had some sort of mini hums.
Some info: https://www.voxshowroom.com/equipment/guitars.html
The semi-hollow ones are actually mostly hollowed out, don't have a conventional centre block.
eclecticsynergy
Well-known member
I have the SSC55, a later solidbody evolution with the CoAxe pickups. The neck on mine also is a fairly thin C.
Similar threads
