Re: Wat is coil tapping
Ok...coil splitting is done on a Humbucking pickup and you simply "turn off" one of the coils, and run it on only one coil, the reason you get hum is because it is not a single coil and can not "buck" the hum.
a coil tap is 2 seperate outputs from a single coil pickup...with a single coil pickup you have 2 wires, with a tapped single coil you have 3 wires, if you read the dc resistance the 2 "hot" wires will have 2 different dc readings, say the total pickup is wound to 8k, then the "tap" is at 6k, with a switch you gan go back and fourth between 6 and 8k, giving you 2 different sounds with 2 pickup.
Does that help?