What if you used magnetic poles and figure 8 winding?

BowerR64

New member
Would that work? if you used figure 8 winding around each pole? would each pole have its own winding kinda?

coil.jpg
 
Re: What if you used magnetic poles and figure 8 winding?

Well, every other pole would be out-of-phase. Besides . . . I'll give you 30 to 40 turns before you chuck it in the bin. :D

Artie

Editted out an idea I've had for some time. ;)
 
Re: What if you used magnetic poles and figure 8 winding?

the biggest problem is that there would be no real coil, hence no induction, hence no function......

it might work after all, but the windings crossing each other will essentially cancel out the magnetic field of each other, so if it works it would probably be very weak....

I´ll put my 10 bucks on the former ;)
 
Re: What if you used magnetic poles and figure 8 winding?

Btw - don't let us nay-sayers discourage you. They used to think the Earth was flat. ;)

Artie
 
Re: What if you used magnetic poles and figure 8 winding?

I think you would run into practical problems caused by the bulking out of the coil where the strands crossover between the pole pieces. It would be like that thing where you can only fold a piece of paper something like eight times, however large the paper is.

There is also the issue of how the hell would you wind it?

I experimented a few years ago with the idea of splitting a coil between the D and G strings, the E,A,D and G,B,E being reversed polarity.

It cancelled the noise well enough but there was a massive dead spot in the middle.

I think that's what would happen with this as each neighbouring pole fed flux into the other rather than reaching out to the strings.
 
Back
Top